Air Compressor Condensate Management
CRP Paks
• 15, 30 & 55 Gallon Sizes
Condensate Management CRP Paks
from Clean Resources facilitate trouble-free, oil/water
separation in compressed air systems, guaranteed to meet
the EPA requirements for condensate discharge.
CRP Paks are filled with molecular filtration media of
the highest quality alumino silicate substrate that absorbs
lubricants from waste water, locks them in, and allows
the cleansed discharge water to flow clean to the drain,
virtually eliminating the possibility of ground water contamination.
The filtration media is so efficient that CRP Paks do
not require prefiltration and so do not need all the equipment
associated with prefiltration such as pumps, sensors, or
pre-separation filter pads
Operating efficiently in all conditions, CRP Paks are
engineered to minimize maintenance and clean up headaches.
Rugged internal piping and a fail-safe decompression chamber
assure proper operation.
CRP Paks work with both emulsified and non-emulsified
lubricants.
CRP
Pak Product Specification |
| |
CRP
13 |
CRP
30 |
CRP
55 |
Absorption Capacity,
gal of lubricant |
7-8 |
14-16 |
27-28 |
| Inlet/Outlet (in) |
2" /0.75" |
2" / 2" |
2" / 2" |
| Height (H) |
20" |
29" |
33" |
| Width (A / B) |
15" |
19" |
23" |
| Max. Flow (GPM) |
5 |
10 |
15 |
| Max.. PSIG |
5 |
5 |
5 |
| Max. Temp |
125 |
125 |
125 |
| Shipping Weight (approx) |
105 lbs. |
214 lbs. |
375 lbs. |
GUARANTEED PERFORMANCE
CRP Paks, when properly sized and installed, are guaranteed
to reduce the contaminants in your compressor condensate
to less than 10 ppm, for the life of the unit. In the
event a unit fails while operating in approved conditions
and having been properly sized and installed, Clean
Resources, Inc. will replace the failed CRP Pak or
provide a refund through your distributor
Contact McKenzie for all your air compressor condensate
management needs:
Call 1-800-764-9793 or Use our Contact
Form.
|
